Tensiometer data output kit

Tension data can be outputted to a computer by typing each reading into our tension utility or with a dedicated cable system. For our Digital tensiometer, order the Digital foot pedal system (500-1114). This is our most popular model. 

Lastly, there is a Mitutoyo cable (500-1111) that requires pushing a button at the gauge end for output—awkward compared to a foot pedal but it ends with a USB plug for direct connection to a computer.

These cables are compatible with all computers and with our tension utility which supports automatic zeroing. It's easy:

1. Connect the cable to your tensiometer.
2. Open the utility (once open it runs entirely in your browser, no sustained web connection needed) and place the cursor in the first tension cell.
3. Manually zero the tensiometer on this first spoke only. Also press zero on the cable box.
4. Release and observe the reading. Now press foot switch (or the cable button) to input the number into the utility, which will convert it to actual kgf and begin building a radar chart (for archive or customer sharing).
5. On the second spoke, place the tool. If it is not zeroed, rather than zero it manually, press the cable button once. This automatically signals the utility to adjust.
6. Now release (observe your reading) and press the button once more. The data is sent to the utility where it is adjusted, converted to actual tension, and entered in the spreadsheet.

Complete instructions accompany all cables.